Bags must not be altered from their original state- altered/new seams, refilled/altered filling, restamped logos, etc. Bags must have clearly printed manufacturer logo and series name.Bags must maintain all ACO Approved specs above regardless of wear and tear.Bags may have rounded corners but cannot be rounded more than 0.5” from the corner on a 6” x “6 bag 1.5 Player Responsibilities for Bags.Each bag must have clearly printed manufacturer logo/name and series name.When flat, each bag not to exceed 8.25 inches (21cm) across at its widest point (corner to corner).When flat, each bag to be a minimum of 5.75 inches (14.60cm) across at its narrowest point (side to side).When flat, each bag to have a minimum thickness of 1.125 inch (3.18cm).When flat, each bag not to exceed a thickness of 1.5 inches (3.8cm).Each bag weighs between 15.75 ounces (447g) and 16.25 ounces (461g).Each bag is filled with plastic resin/beads which will not breakdown.Approved bags are not required to be listed on and may be approved by the Certified Official on the day of the event if they meet approval specs 1.4 ACO Approved Bag Specs.A complete list of ACO Pre-Approved Bags can be found on /bring-your-own-weapon.Players may bring their own ACO Approved Bags to ACO Tour Events.Bags that have been approved by the ACO for use at ACO Tour Events (ACO Regionals, Majors, Conference Championships, State Championships).The surface should allow bags to slide when thrown, but not be so slippery that the bags slide back down the platform. The playing surface can be painted with a high gloss latex paint or varnish.There should be little to no blemishes in the wood surface that may disrupt or distort play. The playing surface should be finished – sanded to a smooth texture.The back of the board is 12” from the ground to the top of the playing surface.The front of the board is 3” to 4” from the ground to the top of the playing surface.Each hole is 6” diameter, centered 9” from the top of the board and centered from each side edge.The playing surface has a minimum thickness of 1/2” with cross-section backing, or 3/4” with or without cross-section backing.Hardwood plywood playing surface measuring 47.5” to 48” x 23.5” to 24”.To be classified as ACO Approved, equipment must comply with the criteria below.ACO Approved bags may be used for both ACO Regional and Major tournaments during ACO Season 16 and at the ACO World Championships of Cornhole 16.ACO Approved boards may be used for the coordination of ACO Regional tournaments during ACO Season 16.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |